|
Go ahead, and get the "little extras" ... you deserve it! |
|
|
|
|
PEDIMENT TOP
Designed for installation over standard cabinets. A standard
moulding is added to exposed top and side edges and across front
face. Add architectural interest to your kitchen or to an
individual cabinet.
|
|
|
TORUSES
Shown above is the plain half-round Torus used next to a farm
sink base. Also Furniture Toe Board is used along with the Torus.
Southwest Toe Board is also available. Below are the three Torus
styles: rope, plain half-round and reeded. |
|
|
OVOLOS
Shown on top is the Reeded and Concave Ovolos. Above is a Reeded
Ovolo used in a run of base cabinets. Also available: Plain and
Quarter Round. |
|
HUTCH TOE BOARD
The edge of this solid wood board is profiled to match the door
style on the cabinets. Use around an island, a stand-alone hutch
piece, or on an entertainment cabinet.
|
|
|
Brackets |
SPTBE
Salem Maple
|
SPTBA
Cherry hill Pine
|
SPTBD SPECIAL
Breezewood Cherry
|
SPTBD
Breezewood Cherry
|
|
Fretwork |
AEGEAN FRETWORK
|
|
|
Valances |
VALANCE A HEARTLAND BROWN CHERRY
VALANCE F CHESTNUT PINE
VALANCE G MOLASSES CHERRY
VALANCE K CINNAMON PREMIUM ALDER
|
VALANCE T BREEZEWOOD MAPLE
VALANCE W NATURAL HICKORY
VALANCE X PLANTATION YELLOW HEARTWOOD
VALANCE Y BREEZEWOOD RED OAK
|
|
Turned
Legs |
TLEG2
|
TLEGF5
|
TLEGH4
|
TLEGH5
|
TLEGC5
|
TLEGG1
|
TLEGE3
|
TLEGD1
|
TLEGG3
|
TLEGC1
|
TLEGE4
|
TLEGG6
|
|
Bun Feet |
BNFTF2
|
BNFTE2
|
BNFTC2
|
BNFTD2
|
BNFTA
|
BNFTD1
|
BNFTB
|
BNFTC1
|
BNFTE1
|
|
Enkeboll
Crystal is pleased to offer
fine architectural wood carvings from Raymond Enkeboll Designs.
Raymond Eneboll Designs sets the highest standards in the
industry for quality and the manufacturing of architectural
woodcarvings. Each design is detailed by a master carver with
inspection being a never-ending task to ensure consistency of the
finished product. Once produced, the wood carvings are carefully
packed in an environmentally safe foam packing material to
minimize any “in transit” damage. When the wood carving is
received by Crystal Cabinets, we match up the wood carving to the
rest of the job. If the piece is an intricate part of a cabinet
design, it is applied and then finished. Any pieces ordered loose
are finished with the product produced at Crystal to achieve a
finish that is consistent across the entire cabinet order.
Enkeboll pieces
are available in the following wood species: alder, cherry, maple
and red oak. A wide variety of Crystal’s finishes are available
on the pieces. However, there may be some finish restrictions due
to the intricate carving of the pieces.
|
ENK-MLD-G03
|
ENK-MLD-LA1
|
ENK-MLD-GB6
|
ENK-MLD-GB9
|
ENK-CBL-AM1
|
ENK-CBL-TN2
|
ENK-CBL-AN2
|
ENK-CBL-AD1
|
ENK-KEY-CB3
|
ENK-ROS-AC1
|
ENK-ROS-FC0
ENK-ROS-FC1
|
ENK-ROS-AO1
|
ENK-ONL-GH3
|
ENK-ONL-AT1
|
ENK-ONL-GT2
|
ENK-ONL-GO1
|
ENK-ONL-AH2
|
ENK-ONL-AC1
|
|
|
|
Organization
Convenience
Design
Detail